Siemens SINAMICS S110 List Manual page 26

Parameter
Overview of parameters
1.1.2 Number ranges of parameters
Note:
The following number ranges represent an overview for all of the parameters
available for the SINAMICS drive family.
The parameters for the product described in this List Manual are described in
detail in Chapter 1.2.
Parameters are grouped into the following number ranges:
Table 1-7
From
0000
0100
0200
0300
0400
0500
0600
0700
0800
0840
0880
0900
1000
1200
1300
1400
1800
1900
2000
2010
2100
2140
2200
2360
1-26
Number ranges for SINAMICS
Range
To
0099 Display and operation
0199 Commissioning
0299 Power unit
0399 Motor
0499 Encoder
0599 Technology and units, motor-specific data, probes
0699 Thermal monitoring, maximum current, operating hours, motor
data, central probe
0799 Control Unit terminals, measuring sockets
0839 CDS, DDS data sets, motor changeover
0879 Sequence control (e.g. signal source for ON/OFF1)
0899 ESR, parking, control and status words
0999 PROFIBUS/PROFIdrive
1199 Setpoint channel (e.g. ramp-function generator)
1299 Functions (e.g. motor holding brake)
1399 U/f control
1799 Control
1899 Gating unit
1999 Power unit and motor identification
2009 Reference values
2099 Communication (fieldbus)
2139 Faults and alarms
2199 Signals and monitoring
2359 Technology controller
2399 Staging, hibernation
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
Description
© Siemens AG 2012 All Rights Reserved