Siemens SINAMICS S110 List Manual page 973

3.1.3 Number ranges of faults and alarms
Note:
The following number ranges represent an overview of all faults and alarms used
in the SINAMICS drive family.
The faults and alarms for the product described in this List Manual are described
in detail in Chapter 3.2.
Faults and alarms are organized into the following number ranges:
Table 3-4
From
1000
4000
5000
6000
6900
7000
8000
9000
13000
13002
20000
30000
31000
32000
33000
34000
35000
35200
36000
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
Number ranges of faults and alarms
To
3999 Control Unit
4999 Reserved
5999 Power unit
6899 Infeed
6999 Braking Module
7999 Drive
8999 Option Board
12999 Reserved
13010 Licensing
19999 Reserved
29999 OEM
30999 DRIVE-CLiQ component power unit
31999 DRIVE-CLiQ component encoder 1
32999 DRIVE-CLiQ component encoder 2
Note:
Faults that occur are automatically output as an alarm if the
encoder is parameterized as a direct measuring system and
does not intervene in the motor control.
33999 DRIVE-CLiQ component encoder 3
Note:
Faults that occur are automatically output as an alarm if the
encoder is parameterized as a direct measuring system and
does not intervene in the motor control.
34999 Voltage Sensing Module (VSM)
35199 Terminal Module 54F (TM54F)
35999 Terminal Module 31 (TM31)
36999 DRIVE-CLiQ Hub Module
Faults and alarms
Overview of faults and alarms
Range
3-973