Siemens SINAMICS S110 List Manual page 323

r2134[0...63] Alarm value for float values / Alarm value float
All objects Can be changed: -
Data type: FloatingPoint32
P-Group: Messages
Not for motor type: -
Min
-
Description: Displays additional information about the active alarm for float values.
Dependency: Refer to: r2110, r2122, r2123, r2124, r2125, r2145, r2146, r3121, r3123
Note: The buffer parameters are cyclically updated in the background (refer to status signal in r2139).
r2135.0...15 CO/BO: Status word faults/alarms 2 / ZSW fault/alarm 2
All objects Can be changed: -
Data type: Unsigned16
P-Group: Displays, signals
Not for motor type: -
Min
-
Description: Displays the second status word of faults and alarms.
Bit field: Bit Signal name
00 Fault encoder 1
01 Fault encoder 2
12 Fault motor overtemperature
13 Fault power unit thermal overload
14 Alarm motor overtemperature
15 Alarm power unit thermal overload
r2136[0...63] Fault time removed in days / t_flt resolv. days
All objects Can be changed: -
Data type: Unsigned16
P-Group: Messages
Not for motor type: -
Min
-
Description: Displays the system runtime in days when the fault was removed.
Dependency: Refer to: r0945, r0947, r0948, r0949, r2109, r2114, r2130, r2133, r3115, r3120, r3122
Notice: The time comprises r2136 (days) and r2109 (milliseconds).
Note: The buffer parameters are cyclically updated in the background (refer to status signal in r2139).
r2138.7...15 CO/BO: Control word faults/alarms / STW fault/alarm
All objects Can be changed: -
Data type: Unsigned16
P-Group: Displays, signals
Not for motor type: -
Min
-
Description: Displays the control word of the faults and alarms.
Bit field: Bit Signal name
07 Acknowledge fault
10 External alarm 1 (A07850) effective
11 External alarm 2 (A07851) effective
12 External alarm 3 (A07852) effective
13 External fault 1 (F07860) effective
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
Calculated: -
Dynamic index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dynamic index: -
Units group: -
Scaling: -
Max
-
1 signal
Yes
Yes
Yes
Yes
Yes
Yes
Calculated: -
Dynamic index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dynamic index: -
Units group: -
Scaling: -
Max
-
1 signal
Yes
Yes
Yes
Yes
Yes
Parameter
List of parameters
Access level: 3
Func. diagram: 8065
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 2
Func. diagram: 1530, 2548
Unit selection: -
Expert list: 1
Factory setting
-
0 signal FP
No -
No -
No -
No -
No -
No -
Access level: 3
Func. diagram: 8060
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 2
Func. diagram: 1530, 2546
Unit selection: -
Expert list: 1
Factory setting
-
0 signal FP
No -
No -
No -
No -
No -
1-323