Siemens SINAMICS S110 List Manual page 24

Parameter
Overview of parameters
Description
Explanation of the function of a parameter.
Values
Lists the possible values of a parameter.
Recommendation
Information about recommended settings.
Index
The name and meaning of each individual index is specified for indexed parame-
ters.
The following applies to the values (Min, Max, Factory setting) of indexed adjust-
able parameters:
• Min, Max:
The adjustment range and unit apply to all indices.
• Factory setting:
When all indices have the same factory setting, index 0 is specified with the
unit to represent all indices.
When the indices have different factory settings, they are all listed individually
with the unit.
Bit array
For parameters with bit arrays, the following information is provided about each
bit:
• Bit number and signal name
• Meaning with signal states 0 and 1
• Function diagram (optional)
The signal is shown on this function diagram.
Dependency
Conditions that must be fulfilled in connection with this parameter. Also includes
special effects that can occur between this parameter and others.
See also: List of other relevant parameters to be considered.
Safety notices
Important information that must be observed to avoid the risk of physical injury or
material damage.
Information that must be observed to avoid any problems.
1-24
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3