Initiate Mode - Avaya G450 Cli Reference Manual

Parameters
Parameter
desc
User Level
read-write
Context
crypto isakmp peer
Example
To specify the ISAKMP peer description as "New York office":
G450-001(config-peer:135.64.102.109)# description "New York office"
Related Commands
continuous-channel,
keepalive (VPN), keepalive-track, pre-shared-key, self-identity,
isakmp peer,

initiate mode

Use the initiate mode command to specify which IKE Phase-1 mode to use when
communicating with the peer. Use the no form of this command to restore the default setting,
which is main mode.
Note:
Aggressive mode is one of the prerequisites for working with dynamic IP
Note:
addresses.
Syntax
[no] initiate mode {main | aggressive | none}
Description
The description of the ISAKMP peer.
Note: If you wish to include spaces in the
description, you must enclose the string
in quotation marks ("").
crypto isakmp
suggest-key
peer, initiate mode, isakmp-policy,
Possible Default
Values Value
string of
1-80
characters
show crypto
Issue 1 January 2008
VPN
1217