Continuous-Channel - Avaya G450 Cli Reference Manual

Syntax
[no] crypto map id
Parameters
Parameter
id
User Level
read-write
Context
general
Example
To enter the crypto map context and create or edit crypto map 10:
G450-001(super)# crypto map 10
G450-001(config-crypto:10)#
Related Commands

continuous-channel,

crypto isakmp policy,
set dscp, set peer (crypto
continuous-channel
Use the continuous-channel command in a crypto ISAKMP peer context, to enable
continuous-channel IKE, which keeps the IKE phase1 session always up and running, even if
there is no traffic. Use the no form of this command to disable continuous-channel IKE (default
setting).
Use the continuous-channel command in a crypto map context, to enable
continuous-channel IPSec, which keeps an IPSec tunnel continuously up, even if there is no
traffic. Use the no form of this command to disable continuous-channel IPSec (default setting).
Syntax
[no] continuous-channel
Description
The crypto map ID
crypto ipsec transform-set,
description (crypto map),
map), set peer-group,
Possible
Values
1-50
crypto isakmp peer, crypto isakmp
ip crypto-list, ip crypto-group,
show crypto map
Issue 1 January 2008
VPN
Default
Value
peer-group,
set transform-set,
1235