Show Queue - Avaya G450 Cli Reference Manual

Example
To enable priority queueing:
G450-001(if:Serial 3/1:1)# priority-queue
Related Commands - Priority queueing
queue-limit, show
Related Commands - WFVQ
fair-queue-limit, fair-voip-queue,

show queue

Use the show queue command to display information about the real-time status of output
queues for the current interface.
Note:
This command is only applicable in fair-voip-queue mode.
Note:
Syntax
show queue type identifier
Parameters
Parameter
type
identifier
User Level
read-only
queueing, voip-queue,
show queue,
Description
The type of interface
The identifier depends on the interface type:
For Fast Ethernet: module/port
For Serial:
module/port:channel-group
WFVQ (Weighted Fair VoIP Queueing)
voip-queue-delay
show queueing, voip-queue
Possible Default
Values Value
Fast Ethernet
Serial
channel-group:
E1: 0-30
T1: 0-23
Issue 1 January 2008 1299