Ip Vrrp Override Addr Owner - Avaya G450 Cli Reference Manual

User Level
read-write
Context
interface:FastEthernet (L2-L3, L2), VLAN (L2-L3, L2)
Example
To specify the password authentication for virtual router 1 as "sec01":
G450-001(if:Vlan 2)# ip vrrp 1 auth-key sec01
Related Commands
ip vrrp, ip vrrp address,
priority, ip vrrp

ip vrrp override addr owner

Use the ip vrrp override addr owner command to accept packets addressed to the IP
address associated with the virtual router, such as ICMP, SNMP, and Telnet (if it is not the IP
address owner and it is the master). Use the no form of this command to discard these packets.
Syntax
[no] ip vrrp vr_id override addr owner
Parameters
Parameter
vr_id
User Level
read-write
Context
interface:FastEthernet (L2-L3, L2), VLAN (L2-L3, L2)
Example
To specify that virtual router 1 accepts ICMP, SNMP, and Telnet packets:
G450-001(if:Vlan 2)# ip vrrp 1 override addr owner
ip vrrp override addr
timer, router vrrp, show ip vrrp
Description
The virtual router ID
owner, ip vrrp preempt, ip vrrp primary, ip vrrp
Possible Default
Values Value
1-255
Issue 1 January 2008
VRRP
1273