Fair-Voip-Queue - Avaya G450 Cli Reference Manual

Parameters
Parameter
size
User Level
admin
Context
interface:Dialer (L2, L2-L3), Serial (DS1 PPP L2, DS1 PPP L2-L3, USP PPP L2,
USP PPP L2-L3), FastEthernet (L2, L2-L3, PPP L2, PPP L2-L3) - when traffic shaping is
configured, Serial (DS1 FR L2, USP FR L2) - when Frame Relay Traffic Shaping is not
configured, map-class frame-relay
Example
To specify the maximum number of packets queued in the weighted fair queue as 500:
G450-001(super-if:FastEthernet 10/2)# fair-queue-limit 500
Related Commands - WFVQ
fair-voip-queue, priority-queue,

fair-voip-queue

Use the fair-voip-queue command to enable Weighted Fair VoIP Queueing (WFVQ) on
the current interface. WFVQ provides more fair service for data packets, and improves
response time for interactive data applications (such as Telnet). WFVQ is the default queueing
mode for all Serial interfaces and all FastEthernet interfaces for which traffic-shaping is
enabled. To disable WFVQ, you must enable another queueing mode, using either the
voip-queue or the priority-queue command in interface context.
Note:
The commands fair-voip-queue and voip-queue are mutually exclusive,
Note:
and cannot both appear in a configuration script.
Note:
The command fair-voip-queue is not applicable for an interface on which
Note:
Frame-Relay Traffic-Shaping is enabled.
Description
The maximum number of packets that can
be queued in the weighted fair queue
show queue,
WFVQ (Weighted Fair VoIP Queueing)
show queueing, voip-queue
Possible Default
Values Value
Issue 1 January 2008 1297