Autoneg; Duplex - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands
description (interface),
interface USB-modem,
crypto-group, load-interval,

autoneg

Use the autoneg command to set the port speed and duplex to auto-negotiation mode for the
external Fast Ethernet port. Use the no form of this command to disable auto-negotiation mode.
Syntax
[no] autoneg
User Level
read-write
Context
interface:FastEthernet (L2, L2-L3)
Related Commands
interface FastEthernet, duplex, keepalive-track,

duplex

Use the duplex command to control the duplex setting for the current interface.
Note:
This command functions only in no autoneg mode.
Note:
Syntax
duplex {full|half}
1292 Avaya G450 CLI Reference
interface console, interface
interface vlan, ip address,
show ip interface brief
WAN Ethernet port configuration
loopback, interface
ip admin-state, ip broadcast-address,
speed (interface), traffic-shape rate
serial, interface tunnel,
ip