Show Frame-Relay Map - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands
show controllers,
show interfaces,

show frame-relay map

Use the show frame-relay map command to display a summary table of Frame Relay
sub-interfaces and DLCIs associated with the sub-interfaces.
Syntax
show frame-relay map
User Level
read-only
Context
general
Example
To display information about the Frame Relay sub-interfaces:
G450-001(super)# show frame-relay map
Showing 2 frame-relay map entries
Interface
----------- ------ -------------- ---- --------- ------
Serial 1.1
Serial 1.1
Related Commands
clear frame-relay
frame-relay pvc
1284 Avaya G450 CLI Reference
show frame-relay fragment,
show ip interface, show map-class frame-relay
State Interface Type DLCI DLCI Type DLCI State
down point-to-point
down point-to-point
counters, frame-relay
brief, show interfaces
show frame-relay
17 broadcast deleted
18 broadcast deleted
class-dlci, interface serial,
WAN configuration, verifying
pvc, show frame-relay
map-class frame-relay,
traffic,
show