Show Queueing - Avaya G450 Cli Reference Manual

CLI Commands
Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L2, DS1 FR L2, USP FR L2, USP PPP L2,
USP PPP L2-L3), FastEthernet (L2, L2-L3) - when traffic shaping is configured, Dialer (L2,
L2-L3)
Examples
To display output queues real-time status information for FastEthernet port 10/2:
G450-001(super)# show queue FastEthernet 10/2
To display output queues real-time status information for Serial port 3/1:2:
G450-001(super)# show queue Serial 3/1:2
Related Commands - WFVQ
fair-queue-limit, fair-voip-queue, priority-queue,

show queueing

Use the show queueing command to display the priority queueing and WFVQ configuration,
for a specific interface type or interface, or for all interfaces.
Syntax
show queueing [interface_type if_number]
Parameters
Parameter
interface_type
if_number
User Level
read
Context
general
1300 Avaya G450 CLI Reference
Description
The type of interface
The port number of this interface in
the form: port[:channel_group]
WFVQ (Weighted Fair VoIP Queueing)
show queueing, voip-queue
Possible Values
Serial,
Fast-Ethernet
port: 1, 2
channel_group:
E1: 0-30
T1: 0-23
Default
Value