Show Ip Active-Lists - Avaya G450 Cli Reference Manual

Output fields
Name
ID
Description
Remote peer /
Group
Transform-set
DSCP
C-cnl
Related Commands
clear crypto isakmp,
show crypto ipsec
show crypto isakmp

show ip active-lists

Use the show ip active-lists command to display information about a specific policy list
or all lists.
Syntax
show ip active-lists [list_index | list_type]
Parameters
Parameter
list_index
list_type
User Level
read-only
Description
Crypto map ID (set using the
Crypto map description
IP address or name of remote peer, or name of Peer Group
The name of the transform-set
The DSCP configuration
Whether continuous channel is enabled (
clear crypto sa, clear crypto sa
transform-set, show crypto isakmp
policy, show crypto isakmp
Description
The index of the policy list to view
The type of list: ACL, Crypto, PBR, QoS
crypto map command)
Yes
counters, crypto map,
peer, show crypto isakmp
sa, show ip active-lists,
Issue 1 January 2008
) or disabled ( )
No
show crypto ipsec sa,
peer-group,
show ip crypto-list
Possible Default
Values Value
300-499
VPN
1265