Parameters
Parameter
id
User Level
read-write
Context
crypto isakmp peer
Example
To set ISAKMP policy for peer 149.49.70.1:
G450-001(config-peer:149.49.70.1)# isakmp-policy 20
Related Commands
description (ISAKMP
mode,
keepalive
crypto isakmp
keepalive (VPN)
Use the keepalive command in crypto isakmp peer interface context to enable DPD (Dead
Peer Detection) keepalives that check whether the remote peer is up. Use the no form of this
command to disable DPD keepalives (default setting).
Syntax
[no] keepalive [seconds [retry retry-seconds] [on-demand | periodic] ]
Parameters
Parameter
seconds
retry-seconds
Description
The ID of the ISAKMP policy
peer), continuous-channel,
(VPN), keepalive-track, pre-shared-key, self-identity,
peer,
suggest-key
Description
The number of seconds between DPD
keepalive probes
The number of seconds between retries if
keepalive fails
Possible
Values
1-20
crypto isakmp
peer,
Possible
Values
10-3600
2-60
Issue 1 January 2008
VPN
Default
Value
initiate
show
Default
Value
1219