Show Frame-Relay Fragment - Avaya G450 Cli Reference Manual

Related Commands - E1/T1 interfaces
cablelength long,
interface serial,
Related Commands - Verifying WAN configuration
show frame-relay
traffic, show interfaces,

show frame-relay fragment

Use the show frame-relay fragment command to display frame-relay fragmentation
statistics and configuration on all PVCs, all PVCs associated with an interface, or a specific
PVC.
Note:
When statistics for multiple PVCs are shown, they are sorted first by interface
Note:
type and number, and then by DLCI.
Syntax
show frame-relay fragment [interface interface_name|dlci_number]
Parameters
Parameter
interface_name
dlci_number
User Level
read-only
Context
general
Example
To show details on configuration and statistics for fragmentation on all PVCs associated with
interface Serial 4/1:
G450-001(super)# show frame-relay fragment interface "Serial 4/1"
cablelength short, channel-group,
ip address, linecode (E1),
fragment, show frame-relay
show ip interface,
Description
Type and identifier of the interface, enclosed
in quotes
The PVC identifier
clock source, controller, ds-mode, framing,
linecode (T1), remote
lmi, show frame-relay
show map-class frame-relay
WAN configuration, verifying
pvc, show frame-relay
Possible Default
Values Value
16-1007
Issue 1 January 2008 1281