Wfvq (Weighted Fair Voip Queueing); Fair-Queue-Limit - Avaya G450 Cli Reference Manual

CLI Commands
Context
interface:FastEthernet(L2, L2-L3)
Example
To set the traffic-shaping rate to 128000:
G450-001(if:FastEthernet 10/2)# traffic-shape rate 128000
Related Commands - WAN Ethernet port configuration
interface FastEthernet, autoneg, duplex, keepalive-track,
Related Commands - Traffic shaping
frame-relay traffic-shaping,
map-class frame-relay,
traffic-shape-statistics

WFVQ (Weighted Fair VoIP Queueing)

fair-queue-limit

Use the fair-queue-limit command to specify the maximum number of packets that can
be queued in the weighted fair queue. The allowable upper limit depends on the bandwidth
configured for the interface.
Note:
The command fair-queue-limit is not applicable to an interface on which
Note:
Frame Relay Traffic Shaping is enabled. Instead, this command is now applicable
in map-class frame-relay context, to control the specific DLCI queueing
parameters.
Syntax
[no] fair-queue-limit size
1296 Avaya G450 CLI Reference
map-class frame-relay,
show traffic-shape, show
WFVQ (Weighted Fair VoIP Queueing)
speed (interface),
bc out, be out, cir out, fragment,
traffic-shape-queue, show
show