Set Peer (Crypto Map) - Avaya G450 Cli Reference Manual

CLI Commands
Examples
To set the DSCP value in the tunneled packet to 10:
G450-001(config-crypto:1)# set dscp 10
To specify that the DSCP is copied from the DS field of the original packet:
G450-001(config-crypto:1)# no set dscp
Related Commands
continuous-channel,
transform-set

set peer (crypto map)

Use the set peer command to attach a peer to a crypto map. Use the no form of the
command to remove the peer from the crypto map.
Note:
You can only change the peer of a crypto map when the map is inactive.
Note:
Note:
The set peer and set peer-group commands are mutually exclusive. You
Note:
can attach to a given crypto map either a peer or a peer-group, not both.
Syntax
set peer {ip-address | hostname}
no set peer
Parameters
Parameter
ip-address
hostname
User Level
read-write
Context
crypto map
1238 Avaya G450 CLI Reference
description (crypto map),
Description
The remote peer IP address
The remote peer hostname
set peer (crypto map), set peer-group, set
Possible Default
Values Value
VPN