Show Frame-Relay Traffic - Avaya G450 Cli Reference Manual

CLI Commands
out DE pkts
pvc create time 00:05:17,
last time pvc status changed 00:05:07
foobar
cir
bc
be
current bc
current be
delayed pkts
dropped pkts
delayed byts
dropped byts
threshold is 20% of bc
fragment size is 88PVC Statistics for interface Serial 2 (Frame Relay DTE)
Related Commands
show controllers,
show interfaces,

show frame-relay traffic

Use the show frame-relay traffic command to display frame-relay protocol statistics,
including ARP requests and replies sent and received over Frame Relay interfaces.
Syntax
show frame-relay traffic
User Level
read-only
Context
general
Example
To display frame-relay statistics:
G450-001(super)# show frame-relay traffic
Frame Relay statistics:
ARP requests sent
ARP requests recvd
1286 Avaya G450 CLI Reference
0
70000,
7000,
0 interval
7000,
0 pkts
0,
0 bytes
0,
0 de pre mark is on,
end-to-end fragmentation is on,
show frame-relay fragment,
show ip interface, show map-class frame-relay
0, ARP replies sent
0, ARP replies recvd
WAN configuration, verifying
traffic-shaping configured by map-class
100,
0,
0,
show frame-relay lmi,
0
0
show frame-relay traffic,