Isakmp-Policy - Avaya G450 Cli Reference Manual

CLI Commands
Parameters
Parameter
main
aggressive
none
User Level
read-write
Context
crypto isakmp peer
Example
To initiate aggressive mode:
G450-001(config-peer:149.49.70.1)# initiate mode aggressive
Related Commands
continuous-channel,

isakmp-policy,

self-identity,
isakmp-policy
Use the isakmp-policy command to set the ISAKMP policy for the ISAKMP peer. Use the no
form of the command to delete the ISAKMP policy for the ISAKMP peer.
Note:
You cannot delete an ISAKMP policy that is referenced by an ISAKMP peer that
Note:
is, in turn, referenced by an active crypto map.
Syntax
[no] isakmp-policy id
1218 Avaya G450 CLI Reference
Description
Keyword specifying that the device operate in
IKE main mode
Keyword specifying that the device operate in
IKE aggressive mode. Specify this option when
local IP is dynamic.
Keyword specifying that the device act as an
IKE Phase-1 responder. Specify this option only
when communicating with a dynamically
addressed remote peer.
description (ISAKMP
keepalive (VPN), keepalive-track, pre-shared-key,
show crypto isakmp
peer), crypto isakmp
peer, suggest-key
VPN
Possible Default
Values Value
peer,