Ip Vrrp Primary - Avaya G450 Cli Reference Manual

ip vrrp primary

Use the ip vrrp primary command to set the primary address that is used as the source
address of VRRP packets for the virtual router ID. Use the no form of this command to restore
the default primary address for the virtual router instance. By default, the primary address is
selected automatically by the device.
Syntax
[no] ip vrrp vr_id primary ip_address
Parameters
Parameter
vr_id
ip_address
User Level
read-write
Context
interface:FastEthernet (L2-L3, L2), VLAN (L2-L3, L2)
Example
To specify the source IP address for virtual router 1 as 192.168.66.23:
G450-001(if:Vlan 2)# ip vrrp 1 primary 192.168.66.23
Related Commands
ip vrrp, ip vrrp address,
priority, ip vrrp
Description
The virtual router ID
The primary IP address of the virtual router.
This address should be one of the router
addresses on the fabric.
ip vrrp auth-key,
timer, router vrrp, show ip vrrp
ip vrrp override addr owner,
Possible Default
Values Value
1-255
ip vrrp preempt, ip vrrp
Issue 1 January 2008
VRRP
1275