Speed (Interface) - Avaya G450 Cli Reference Manual

CLI Commands
Parameters
Parameter
track-id
User Level
read-write
Context
interface:Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3,
USP PPP L2, USP PPP L2-L3) FastEthernet (L2, L2-L3, PPP L2, PPP L2-L3), Loopback (L2,
L2-L3), Dialer (L2, L2-L3)
crypto isakmp peer
Example
To register a remote VPN peer with object tracker 5:
G450-001(config-peer:149.49.70.1)# keepalive-track 5
To register the FastEthernet interface with object tracker 2:
G450-001(config-if:FastEthernet 10/2)# keepalive-track 2
Related Commands - WAN Ethernet port configuration
interface FastEthernet, autoneg, duplex,
Related Commands - VPN
description (ISAKMP
mode, isakmp-policy,
crypto isakmp

speed (interface)

Use the speed command to control the speed setting for the interface.
Note:
This command functions only in no autoneg mode.
Note:
Syntax
speed speed_rate
1294 Avaya G450 CLI Reference
Description
The ID of the object tracker
peer), continuous-channel,
keepalive (VPN), pre-shared-key, self-identity,
peer, suggest-key
speed (interface), traffic-shape rate
crypto isakmp
WAN Ethernet port configuration
Possible Default
Values Value
1-100
peer, initiate
show