Display Tcp Ipv6 Status; Display Udp Ipv6 Statistics - H3C S3100 Series Command Manual

established connections
Closed connections
dropped
initiated dropped

display tcp ipv6 status

Syntax
display tcp ipv6 status
View
Any view
Parameters
None
Description
Use the display tcp ipv6 status command to display the IPv6 TCP connection status, including IP
address of the IPv6 TCP control block, local and peer IPv6 addresses, and status of the IPv6 TCP
connection.
Examples
# View the IPv6 TCP connection status.
<Sysname> display tcp ipv6 status
TCP6CB Local Address
83a9fba4 ::->23
Table 1-15 Description on the fields of the display tcp ipv6 status command
Field
TCP6CB
Local Address
Foreign Address
State

display udp ipv6 statistics

Syntax
display udp ipv6 statistics
View
Any view
Parameters
None
Field
Foreign Address
::->0
IPv6 address of the TCP control block (hexadecimal)
Local IPv6 address
Remote IPv6 address
TCP connection status, including: Closed, Listening, Syn_Sent, Syn_Rcvd,
Established, Close_Wait, Fin_Wait1, Closing, Last_Ack, Fin_Wait2, Time_Wait
1-22
Description
Number of established connections
Number of closed connections
Number of dropped connections (after receiving SYN
from the peer)
Number of connection failures (before receiving SYN
from the peer)
State
Listening
Description