Display Udp Ipv6 Statistics - H3C s3600 series Command Manual

Examples
# View the IPv6 TCP connection status.
<Sysname> display tcp ipv6 status
TCP6CB Local Address
83a9fba4 ::->23
Table 1-12 Description on the fields of the display tcp ipv6 status command
Field
TCP6CB
Local Address
Foreign Address
State

display udp ipv6 statistics

Syntax
display udp ipv6 statistics
View
Any view
Parameters
None
Description
Use the display udp ipv6 statistics command to display statistics of IPv6 UDP packets.
You can use the reset udp ipv6 statistics command to clear statistics of all IPv6 UDP packets.
Examples
# View statistics of IPv6 UDP packets.
<Sysname> display udp ipv6 statistics
Received packets:
Total: 10
checksum error: 0
shorter than header: 0, data length larger than packet: 0
unicast(no socket on port): 0
broadcast/multicast(no socket on port): 0
not delivered, input socket full: 0
input packets missing pcb cache: 0
Sent packets:
Total: 21
Foreign Address
::->0
IPv6 address of the TCP control block (hexadecimal)
Local IPv6 address
Remote IPv6 address
TCP connection status, including: Closed, Listening, Syn_Sent,
Syn_Rcvd, Established, Close_Wait, Fin_Wait1, Closing, Last_Ack,
Fin_Wait2, Time_Wait
1-17
State
Listening
Description