Display Dhcp Relay Statistics - H3C S5120-SI Series Command Reference Manual

No.
1
2
Table 1-5 display dhcp relay server-group command output description
No.
Group IP

display dhcp relay statistics

Syntax
display dhcp relay statistics [ server-group { group-id | all } ]
View
Any view
Default Level
1: Monitor level
Parameters
group-id: Specifies a server group number in the range of 0 to 19 about which to display DHCP packet
statistics.
all: Specifies all server groups about which to display DHCP packet statistics. Information for each
group will be displayed.
Description
Use the display dhcp relay statistics command to display DHCP packet statistics related to a
specified or all DHCP server groups.
Note that if no parameter (server-group and all) is specified, all DHCP packet statistics on the relay
agent will be displayed.
Related commands: reset dhcp relay statistics.
Examples
# Display all DHCP packet statistics on the relay agent.
<Sysname> display dhcp relay statistics
Bad packets received:
DHCP packets received from clients:
DHCPDISCOVER packets received:
DHCPREQUEST packets received:
DHCPINFORM packets received:
DHCPRELEASE packets received:
DHCPDECLINE packets received:
BOOTPREQUEST packets received:
DHCP packets received from servers:
Group IP
1.1.1.1
1.1.1.2
Field
Sequence number
IP address in the server group
0
0
0
0
0
0
0
0
0
1-18
Description