Renesas RL78/G1P Hardware User Manual page 746

16-bit single-chip microcontroller

Hide thumbs Also See for RL78/G1P:

Table of Contents

= 40 to +85C, 2.7 V  V

Notes 1. Total current flowing into V

. The values below the MAX. column include the peripheral operation current. However, not

including the current flowing into the A/D converter, D/A converter, LVD circuit, I/O port, and on-chip pull-up/pull-

down resistors and the current flowing during data flash rewrite.

2. During HALT instruction execution by flash memory.

3. When high-speed on-chip oscillator is stopped.

4. When high-speed system clock is stopped.

5. When high-speed on-chip oscillator and high-speed system clock are stopped.

stopped. The values below the MAX. column include the leakage current.

6. Relationship between operation frequency of CPU and operation mode is as below.

HS (high-speed main) mode: @1 MHz to 32 MHz

LS (low-speed main) mode: @1 MHz to 8 MHz

Remarks 1. f

: High-speed system clock frequency (X1 clock oscillation frequency or external main system clock

: High-speed on-chip oscillator clock frequency

3. Except STOP mode, temperature condition of the TYP. value is T

R01UH0895EJ0100 Rev.1.00

Nov 29, 2019

= 0 V) (2/3)

HS (high-speed

LS (low-speed

HS (high-speed

LS (low-speed

, including the input leakage current flowing when the level of the input pin is fixed

CHAPTER 27 ELECTRICAL SPECIFICATIONS

Square wave input

Resonator connection

Square wave input

Resonator connection

Square wave input

Resonator connection

When watchdog timer is