Renesas RL78/G1P Hardware User Manual page 146

RL78/G1P
The timer array unit has four 16-bit timers.
Each 16-bit timer is called a channel and can be used as an independent timer. In addition, two or more "channels" can
be used to create a high-accuracy timer.
For details about each function, see the table below.
Independent Channel Operation Function
 Interval timer ( see 6.8.1)
 Square wave output ( see 6.8.1)
 External event counter ( see 6.8.2)
 Input pulse interval measurement ( see 6.8.3)
 Measurement of high-/low-level width of input signal
( see 6.8.4)
 Delay counter ( see 6.8.5)
It is possible to use the 16-bit timer of channels 1 and 3 of the unit 0 as two 8-bit timers (higher and lower). The
functions that can use channels 1 and 3 as 8-bit timers are as follows:
 Interval timer (upper or lower 8-bit timer)/square wave output (lower 8-bit timer only)
 External event counter (lower 8-bit timer only)
 Delay counter (lower 8-bit timer only)
R01UH0895EJ0100 Rev.1.00
Nov 29, 2019
TIMER ARRAY UNIT
channel 0
channel 1
channel 2
channel 3
Simultaneous Channel Operation Function
 One-shot pulse output ( see 6.9.1)
 PWM output ( see 6.9.2)
 Multiple PWM output ( see 6.9.3)
CHAPTER 6 TIMER ARRAY UNIT
16-bit timers
127