Renesas RL78/G1P Hardware User Manual page 490

RL78/G1P
12.3.2 IICA control register n0 (IICCTLn0)
This register is used to enable/stop I
The IICCTLn0 register can be set by a 1-bit or 8-bit memory manipulation instruction. However, set the SPIEn, WTIMn,
and ACKEn bits while IICEn = 0 or during the wait period. These bits can be set at the same time when the IICEn bit is set
from "0" to "1".
Reset signal generation clears this register to 00H.
Remark n = 0, 1
R01UH0895EJ0100 Rev.1.00
Nov 29, 2019
2
C operations, set wait timing, and set other I
CHAPTER 12 SERIAL INTERFACE IICA
2
C operations.
471