Renesas RL78/G1P Hardware User Manual page 274

RL78/G1P
Cautions 4. In hardware trigger wait mode, make settings that affect the conversion time such that the following
conditions are satisfied.
 f
must be in the range from 1 to 16 MHz.
AD
 When the setting of the ADISS bit of the ADS register is 1, selecting the temperature sensor or
internal reference voltage output, the following condition applies.
Setting LV0 to 0 is prohibited.
Only setting LV0 to 1 is permitted.
Remark f : CPU/peripheral hardware clock frequency
CLK
R01UH0895EJ0100 Rev.1.00
Nov 29, 2019
CHAPTER 9 A/D CONVERTER
255