RL78/G1P
(3) Multiple PWM (Pulse Width Modulation) output
By extending the PWM function and using one master channel and two or more slave channels, up to three types
of PWM signals that have a specific period and a specified duty factor can be generated.
Operation clock
Caution
For details about the rules of simultaneous channel operation function, see 6.4.1 Basic rules of
simultaneous channel operation function.
m: Unit number (m = 0), n: Channel number (n = 0 to 3),
Remark
p, q: Slave channel number (n < p < q 3)
6.1.3 8-bit timer operation function (channels 1 and 3 only)
The 8-bit timer operation function makes it possible to use a 16-bit timer channel in a configuration consisting of two 8-
bit timer channels. This function can only be used for channels 1 and 3.
Caution There are several rules for using 8-bit timer operation function.
For details, see 6.4.2 Basic rules of 8-bit timer operation function (channels 1 and 3 only).
R01UH0895EJ0100 Rev.1.00
Nov 29, 2019
Compare operation
Channel n (master)
Compare operation
Channel p (slave)
Compare operation
Channel q (slave)
CHAPTER 6 TIMER ARRAY UNIT
Interrupt signal (INTTMmn)
Timer output
(TOmp)
Duty
Period
Timer output
(TOmq)
Duty
Period
130