Cautions When Using Timer Array Unit; Cautions When Using Timer Output - Renesas RL78/G1P Hardware User Manual

RL78/G1P

6.10 Cautions When Using Timer Array Unit

6.10.1 Cautions when using timer output

Depends on products, a pin is assigned as a timer output and other alternate functions. In this case, outputs of the
other alternate functions must be set in initial status.
 Using TO03 output assigned to the P12
So that the alternated PCLBUZ0 output becomes 0, not only set the port mode register (the PM12 bit) and the port
register (the P12 bit) to 0, but also use the bit 7 of the clock output select register 0 (CKS0) with the same setting as
the initial status.
R01UH0895EJ0100 Rev.1.00
Nov 29, 2019
CHAPTER 6 TIMER ARRAY UNIT
226