Renesas RL78/G1P Hardware User Manual page 739

RL78/G1P
27.1 Absolute Maximum Ratings
Absolute Maximum Ratings (T
Parameter
Supply voltage V
V
REGC pin input voltage V
Input voltage V
V
Output voltage V
Analog input voltage V
Notes 1. Connect the REGC pin to Vss via a capacitor (0.47 to 1
maximum rating of the REGC pin. Do not use this pin with voltage applied to it.
2. Must be 4.6 V or lower.
3. Do not exceed AV
Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any
parameter. That is, the absolute maximum ratings are rated values at which the product is on the verge
of suffering physical damage, and therefore the product must be used under conditions that ensure that
the absolute maximum ratings are not exceeded.
Remarks 1. Unless specified otherwise, the characteristics of alternate-function pins are the same as those of the port
pins.
2. AV
: + side reference voltage of the A/D converter.
REF(+)
3. V : Reference voltage
SS
R01UH0895EJ0100 Rev.1.00
Nov 29, 2019
= 25C) (1/2)
A
Symbols
DD
SS
REGC
IREGC
P10 to P17, P20 to P27, P30 to P35, P40, P121,
I1
P122, P137
P60, P61 (N-ch open-drain)
I2
P10 to P17, P20 to P27, P30 to P35, P40, P60,
O1
P61, P121, P122, P137
ANI0 to ANI7, ANI16
AI1
+ 0.3 V in case of A/D conversion target pin.
REF(+)
CHAPTER 27 ELECTRICAL SPECIFICATIONS
Conditions

F).
Ratings
0.5 to +4.6
0.5 to +0.3
0.3 to +2.8
and 0.3 to V Note 1
+0.3
DD
0.3 to V
Note 2
+0.3
DD
0.3 to +6.5
0.3 to V
Note 2
+0.3
DD
0.3 to V
+0.3
DD
and 0.3 to AV
+0.3 Notes 2, 3
REF(+)
This value regulates the absolute
Unit
V
V
V
V
V
V
V
720