Renesas RL78/G1P Hardware User Manual page 429

RL78/G1P
(4) Processing flow (in continuous transmission mode)
Figure 11-83. Timing Chart of Slave Transmission (in Continuous Transmission Mode)
<1>
SSmn
STmn
SEmn
SDRmn
SCKp pin
SOp pin
Shift register mn
INTCSIp
MDmn0
TSFmn
BFFmn
SSIp pin
<2>
Note
Note If transmit data is written to the SDRmn register while the BFFmn bit of serial status register mn (SSRmn) is
1 (valid data is stored in serial data register mn (SDRmn)), the transmit data is overwritten.
Caution The MDmn0 bit of serial mode register mn (SMRmn) can be rewritten even during operation.
However, rewrite it before transfer of the last bit is started.
Remark m: Unit number (m = 0), n: Channel number (n = 0), p: CSI number (p = 00)
R01UH0895EJ0100 Rev.1.00
Nov 29, 2019
(Type 1: DAPmn = 0, CKPmn = 0)
Transmit data 2
Transmit data 1
Transmit data 1
Shift operation
Data transmission
<3> <2>
CHAPTER 11 SERIAL ARRAY UNIT
Transmit data 2
Shift operation
Data transmission
<3> <2>
Transmit data 3
Transmit data 3
Shift operation
Data transmission
<4>
<3>
<6>
<5>
410