RL78/G1P
Notes 1.
The LVIMK flag is set to "1" by reset signal generation.
2.
After an interrupt is generated, perform the processing according to Figure 19-7 Processing Procedure
After an Interrupt Is Generated in interrupt and reset mode.
3.
After a reset is released, perform the processing according to Figure 19-8 Initial Setting of Interrupt and
Reset Mode in interrupt and reset mode.
Remark V
: POR power supply rise detection voltage
POR
V
: POR power supply fall detection voltage
PDR
R01UH0895EJ0100 Rev.1.00
Nov 29, 2019
CHAPTER 19 VOLTAGE DETECTOR
637