Renesas RL78/G1P Hardware User Manual page 49

16-bit single-chip microcontroller

Hide thumbs Also See for RL78/G1P:

Table of Contents

(2) CALLT instruction table area

The 64-byte area 00080H to 000BFH can store the subroutine entry address of a 2-byte call instruction (CALLT). Set

the subroutine entry address to a value in a range of 00000H to 0FFFFH (because an address code is of 2 bytes).

(3) Option byte area

A 4-byte area of 000C0H to 000C3H can be used as an option byte area. For details, see CHAPTER 22 OPTION

(4) On-chip debug security ID setting area

A 10-byte area of 000C4H to 000CDH can be used as an on-chip debug security ID setting area. For details, see

CHAPTER 24 ON-CHIP DEBUG FUNCTION.

R01UH0895EJ0100 Rev.1.00

Nov 29, 2019

Table 3-3. Vector Table

Vector Table Address

CHAPTER 3 CPU ARCHITECTURE

Interrupt Source

RESET, POR, LVD, WDT, TRAP, IAW, RPE

INTST0/INTCSI00