Warning Lamp, Indicator Lamp Description; Fail-Safe Mode - Suzuki GRAND VITARA JB416 Service Manual

4F-3 Electronic Stability Program:
• When no abnormality is detected (the system is in
good condition), ABS warning lamp, EBD warning
lamp, ESP® warning lamp, SLIP indicator lamp and
ESP® OFF lamp turn OFF after 2 seconds.
• When an abnormality in the system is detected, some
of ABS warning lamp, EBD warning lamp (brake
warning lamp), ESP® warning lamp, SLIP indicator
lamp and/or ESP® OFF lamp are turned ON and the
area where that abnormality lies is stored in the
memory in ESP® control module.

Warning Lamp, Indicator Lamp Description

There are five types of warning lamp and indicator lamp in instrument cluster, which are controlled by ESP® control
module. They give warning / indication to driver by changing the modes light ON / blinking / light OFF.
1. ESP® warning lamp
2. EBD warning lamp (brake warning lamp)
The followings are the condition and operation of warning lamps and indicator lamps.
Warning lamp / Indicator lamp
ABS warning lamp
EBD warning lamp (brake warning
lamp)
ESP® warning lamp
SLIP indicator lamp
1
2
3
4
3. ABS warning lamp
4. SLIP indicator lamp
If ABS has abnormality, the lamp turns "ON".
• If EBD system has abnormality, the lamp turns "ON".
• If bake fluid level in reservoir is lower than minimum level, the lamp turns "ON".
• Parking brake switch is ON, the lamp turns "ON".
If ESP® systems has abnormality, the lamp turns "ON".
• If stability control system and traction control system is active, the lamp blinks
at 5 Hz.
• If Steering angle sensor calibration is incompleted, the lamp blinks at 1 Hz.
3
2
1

Fail-Safe Mode

When ESP® control module detects abnormality, the
system goes into fail-safe mode. And some of functions
of ABS, TCS, stability control system are shut down. For
details of fail safe mode, refer to "Fail-Safe Table: ".
5
I6JB01460003-02
5. ESP® OFF lamp
Condition and operation
4 5
I6JB01460002-02
S5JB0E4601003