Configure Qos Module Enable-Rate-Sampling; Configure Qos Module Policing-Cos-Map Ip - Avaya 2330 Reference Manual

Table 242: Variable definitions
<queue-id>
<ewf-value>
[no]
Example
AG/configure/qos/module/congestion-profile 1# exponential-weighting-
constant 8 2

configure qos module enable-rate-sampling

Use this command to enable rate sampling at the system level to initiate the flow rate monitoring
of all classes configured for monitoring.
Syntax
[no] enable-rate-sampling
Table 243: Variable definitions
[no]
Example
AG/configure/qos/module# enable-rate-sampling

configure qos module policing-cos-map ip

Use this command to configure policing based CoS mappings for IP packets. You can configure
user-priority, DSCP, and drop-precedence marking for the packets based on the conformance
level and incoming DSCP value.
One of the optional parameter must be specified while configuring the CoS map
Syntax
[no] policing-cos-map ip <dscp-value> <conformance-level> [drop-
precedence <drop-precedencevalue>] {[user-priority <user-priority-
value>] | [dscp <dscp-value>]}
Command Line Reference
Variable
Variable
configure qos module enable-rate-sampling
Value
Identifier for the queue. Valid ranges: 1-8
EWF value. Valid ranges: 0 – 10
resets the EWF parameter to default value
Value
Disables rate sampling.
August 2013 235