Display Ipv6 Socket - H3C s3100 series Command Manual

Field
Destination
PrefixLength
NextHop
Protocol
Interface
State

display ipv6 socket

Syntax
display ipv6 socket [ socktype socket-type ] [ task-id socket-id ]
View
Any view
Parameters
socket-type: Type of a socket, in the range of 1 to 3. The value "1" represents a TCP socket, "2" a UDP
socket, and "3" a raw IP socket.
task-id: ID of a task, in the range of 1 to 100.
socket-id: ID of a socket, in the range of 0 to 3072.
Description
Use the display ipv6 socket command to display information related to a specified socket.
With no argument specified, this command displays the information about all the sockets; with only the
socket type specified, the command displays the information about sockets of the specified type; with
the socket type, task ID and socket ID specified, the command displays the information about the
specified socket.
Examples
# Display information related to a specified socket.
<Sysname> display ipv6 socket
SOCK_STREAM:
Task = VTYD(43), socketid = 1, Proto = 6,
LA = ::->23, FA = ::->0,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_ACCEPTCONN SO_REUSEADDR SO_KEEPALIVE SO_REUSEPORT SO_SETKEEPALIVE,
socket state = SS_PRIV SS_ASYNC
SOCK_DGRAM:
SOCK_RAW:
Destination network/host IPv6 address.
Prefix length of the destination IPv6 address
Next hop address
Routing protocol discovering the route
Egress interface
Routing entry state: Active (valid route) or Inactive (invalid
route).
1-16
Description