Renault Laguna III Manual page 2183

Rear brake disc: Removal - Refitting
a Clean the brake discs using a parts washer.
a Dry the surface of the discs.
a Use a wire brush and BRAKE CLEANER (see Ve-
hicle: Parts and consumables for the repair) (MR
415, 04B, Consumables - Products) to clean the
stub-axle.
II - REFITTING OPERATION FOR PART
CONCERNED
a refit:
- the « bearing - disc » assemblies,
- the stub axle nuts.
a Torque tighten the stub axle nuts (280 Nm) using
the (Rou. 604-01).
a Refit the disc covers.
III - FINAL OPERATION.
a refit:
- the calliper brackets (see 33A, Rear axle compo-
nents, Rear brake calliper mounting: Removal -
Refitting, page 33A-13) ,
- the brake pads (see 33A, Rear axle components,
Rear brake pads: Removal - Refitting, page 33A-
3) ,
- the rear wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
IMPORTANT
T o avoid any accident, bring the pistons, brake
pads and brake discs into contact by depressing
the brake pad several times.
REAR AXLE COMPONENTS
33A-16
33A