Renault Laguna III Manual page 2187

Shock absorber: Removal - Refitting
REFITTING
I - REFITTING PREPARATION OPERATION
a Always replace:
- the shock absorber bolts,
- the rear axle guard clips.
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- the shock absorber,
- the shock absorber upper bolt,
- the shock absorber lower bolt.
a Compress the spring using the 30 mm component
jack in relation to the suspended wheel position.
Note:
It is possible to torque tighten the shock absorber
lower bolts in vehicle in running order position
(wheels on the ground).
a Tighten to torque:
- the shock absorber upper bolts (110 Nm),
- the shock absorber lower bolts (115 N.m).
III - FINAL OPERATION
DISCHARGE LAMPS
a Clip on the headlight beam adjustment sensor link-
age.
a Refit:
- the rear axle guard,
- the rear axle guard clips,
- the rear axle guard bolts.
a Torque tighten the rear axle guard bolts (8 N.m).
a Refit the rear wheels (see 35A, Wheels and tyres,
Wheel: Removal - Refitting, page 35A-1) .
REAR AXLE COMPONENTS
33A-20
33A