Monitoring Service Levels With Traffic Classes; Table 34: Show Traffic-Class Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE 2010-09-22 Configuration Manual

JunosE 11.3.x Quality of Service Configuration Guide

Monitoring Service Levels with Traffic Classes

Purpose
Action
Meaning
296
Monitoring the QoS Configuration of IEEE 802.3ad Link Aggregation Group
Bundles on page 329
Monitoring the Configuration of QoS Interface Sets on page 330
Monitoring the Configuration of QoS Interface Supersets on page 331
Monitoring the AAA Downstream Rate for QoS on page 332
Monitoring QoS Parameter Instances on page 332
Monitoring QoS Parameter Definitions on page 335
Display information about traffic classes.
To display information about all traffic classes:
host1#show traffic-class
fabric
traffic fabric strict
class weight priority
----------- ------ --------
best-effort 8
best-effort 8
tc1 8
tc2 8
tc3 8
tcs4 8
tcs5 8
To display the number of times that a QoS profile references the traffic class:
host1#show traffic-class brief
traffic-class best-effort referenced 17 times in qos-profiles
To display a list of QoS profiles and traffic-class groups that reference the traffic class:
host1#show traffic-class references
traffic-class best-effort
Referenced by QoS profiles:
atm-default
serial-default
ethernet-default
server-default
Referenced by traffic class groups:
None
Table 34 on page 296 lists the show traffic-class command output fields.

Table 34: show traffic-class Output Fields

Field Name
traffic class
fabric weight
fabric strict priority
no
no
no
no
no
yes
yes
Field Description
Name of the traffic class
Weight of the queue in the fabric
Setting strict-priority queues in the fabric
Copyright © 2010, Juniper Networks, Inc.