Show Snmp Management-Event - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show snmp management-event

Syntax
Release Information
Description
Options
Mode
1130
show snmp management-event [ events | resource | triggers |
statistics [ error | event ] [ trigger triggerOwner triggerName ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays statistical SNMP event information for event table entries, router resources, and
trigger table entries.
events—Displays event table entries
resource—Displays resource information
triggers—Displays trigger table entries
statistics—Displays statistical information
error—Displays error statistics
event—Displays event statistics
triggerOwner—Owner of trigger for which statistics are displayed; string of up to 32
alphanumeric characters
triggerName—Name of trigger for which statistics are displayed; string of up to 32
alphanumeric characters
filter—See Filtering show Commands on page 4
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.