Table of Contents
Advertisement
Chapter 2
AP Group Commands
show AP-Group
User level: privileged, supervisor.
Command Mode: Root, AP-Group Interface
Use the show ap group command to display the AP-Group interface parameters and port
members.
Syntax:
The syntax for this command is:
show AP-Group
Example:
W310-1# show ap-group
num of entries 3
AP-Group Name
---------------------
Related Commands:
•
Use the
The ports cannot be associated with any other AP Group.
•
Use
delete-ports
•
Use
interface AP-Group
12
AP-Group Id
floor2
floor1
floor3
command to add a port or ports to an Access Point (AP) Group.
add-ports
to delete ports that are attached to the AP group.
ports
-----------
------
1
1
2
4
3
8
to create an AP group.
Avaya W310 Command Reference Guide
Advertisement
Table of Contents
