Show Ip Reverse-Arp - Avaya G450 Cli Reference Manual

CLI Commands
To display static ARP mapping:
G450-001(super)# show ip arp static
Note:
When specifying an interface name that includes spaces, enclose the entire
Note:
name in quotation marks (for example, "New York").
Related Commands
arp, arp timeout,

show ip reverse-arp

Use the show ip reverse-arp command to display the IP address of a host, based on a
known MAC address.
Syntax
show ip reverse-arp mac_addr [match_len]
Parameters
Parameter
mac_addr
match_len
User Level
read-only
Context
general
174 Avaya G450 CLI Reference
clear arp-cache, ip max-arp-entries,
Description
The MAC address
The number of bytes in the address to match
ip proxy-arp, show ip reverse-arp
Possible
Values
ARP table
Default
Value