Ppp Authentication - Avaya G450 Cli Reference Manual

CLI Commands

ppp authentication

Use the ppp authentication command to select the authentication method used when
closing a PPP server or client session.
Note:
The value set for ppp authentication affects both the USB interface and the
Note:
Console interface, simultaneously.
Syntax
ppp authentication {pap|chap|none|ras}
Parameters
Parameter
pap
chap
ras
none
User Level
read-write
Context
Interface: Console, USB-modem
Example
To select the CHAP authentication protocol:
G450-001(if:CON)# ppp authentication chap
188 Avaya G450 CLI Reference
Description
Keyword indicating the Password
Authentication Protocol. An unencrypted
password is sent for authentication.
This is the default.
Keyword indicating the Challenge
Handshake Authentication Protocol. An
encrypted password is sent for
authentication.
Keyword indicating Remote Access Service
mode is being used for authentication
Keyword indicating that no password is sent
ASG authentication
Possible Default
Values Value