Standard Toolkit For Controller - ABB OmniCore V250XT Type B Product Manual

8 Reference information

8.4 Standard toolkit for controller

8.4 Standard toolkit for controller
General
All service (repair, maintenance and installation) instructions contain lists of tools
required to perform the specified activity. All special tools, that is, all tools that are
not considered as standard tools as defined below, are listed in their instructions
respectively.
This way, the tools required are the sum of the standard toolkit and any tools listed
in the instructions.
Standard toolkit for controller
Tool
Screw driver, Torx
Screw driver, Torx
Screw driver, Torx
Ball tipped screw driver, Torx
Screw driver, flat blade
Screw driver, flat blade
Screw driver, flat blade
Screw driver
Box spanner
Toolkit recommended for troubleshooting
Tool
Normal shop tools
Multimeter
Camera
426
© Copyright 2023-2023 ABB. All rights reserved.
Description
Tx10
Tx20
Tx25
Tx25
4 mm
8 mm
12 mm
Phillips-1
8 mm
Note
Contents as specified above.
-
To document problems or procedures
Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A