Vlan Configuration - Avaya G450 Cli Reference Manual

VLAN configuration

Table 101: VLAN CLI commands
Root level command
clear port
static-vlan
clear vlan
interface vlan
set port
static-vlan
set port vlan
set port
vlan-binding-mode
set trunk
set vlan
show cam vlan
show port
vlan-binding-mode
show trunk
show vlan
First level command
icc-vlan
Description
Delete statically configured VLANs from the port
Delete an existing VLAN and its interface,
remove the entry from the VLAN table, and return
ports from this VLAN to the default VLAN 1
Create a VLAN interface, enter interface VLAN
configuration mode, or delete a VLAN interface
Set the current VLAN as the ICC-VLAN
Assign a static VLAN to a port
Set the port VLAN ID (PVID)
Define the binding method used by ports
Configure the VLAN tagging mode of a port
Create or modify a VLAN
Display all MAC entries in the CAM table for a
specific VLAN
Display port VLAN binding mode information
Display VLAN tagging information for all or some
ports
Display the VLANs configured in the media
gateway
Issue 1 January 2008 143