Avaya G450 Cli Reference Manual page 148

Roadmap
Table 104: VPN CLI commands (continued)
Root level command
crypto isakmp
suggest-key
crypto map
interface
{FastEthernet|dialer
|serial|VLAN}
see
IP interface
configuration
148 Avaya G450 CLI Reference
First level command
lifetime
continuous-channel
description (crypto
map)
set dscp
set peer (crypto
map)
set peer-group
set transform-set
crypto ipsec df-bit
Second level Description
command
Set the lifetime of the
ISAKMP SA in seconds
Generate a random
string which you can
use as a pre-shared
key for IKE. You must
use the same key on
both peers.
Enter crypto map
context and create or
edit a crypto map
In a crypto ISAKMP
peer context, enable
continuous-channel
IKE, which keeps the
IKE phase1 session
always up and running,
even if there is no
traffic
Enter a description for
the crypto map
Set the DSCP value in
the tunneled packet
Attach a peer to a
crypto map
Attach a peer-group to
a crypto map
Configure the
transform-set
Enter the context of the
FastEthernet, Dialer,
Serial, or VLAN
interface
Set the Don't-Fragment
bit to clear mode or
copy mode
4 of 6