Avaya G450 Cli Reference Manual page 146

Roadmap
Table 104: VPN CLI commands (continued)
Root level command
crypto isakmp nat
keepalive
crypto isakmp peer
146 Avaya G450 CLI Reference
First level command
continuous-channel
description (ISAKMP
peer)
initiate mode
isakmp-policy
keepalive (VPN)
keepalive-track
pre-shared-key
Second level Description
command
Re-enable NAT
Traversal keepalive if it
was disabled, and
configure the keepalive
interval. This command
keeps the NAT devices
tables updated.
Enter the crypto
ISAKMP peer context
and create or edit an
ISAKMP peer
Enable
continuous-channel
IKE, which keeps the
IKE phase1 session
always up and running,
even if there is no
traffic
Enter a description for
the ISAKMP peer
Specify which IKE
Phase-1 mode to use
when communicating
with the peer:
aggressive or none
Set the ISAKMP policy
for the ISAKMP peer
Enable DPD
keepalives that check
whether the remote
peer is up
Bind an object tracker
to a remote VPN peer
or to an interface, to
check whether the
remote peer or the
interface is up
Configure the IKE
pre-shared key
2 of 6