Upload Image File From The Web To Staging Area; Ftp The Image File To Source - Avaya CMC1 Installation Manual

Adding or Removing Hardware
Upgrade Firmware on Programmable Circuit Packs
Set up source circuit pack's file system
Before files can be copied to the source circuit pack, you must set up a file system on the source circuit
pack to accept the files.
1
Log in using a superuser or services login and password.
2
Type enable filesystem board UUCSS login ftplogin ftppassword, where:
•
UUCSS is the location of the source circuit pack.
•
ftplogin is any temporary login ID that you choose for this FTP session (for example,
denver).
•
ftppassword is any password that you choose for this FTP session (for example, broncos).
The password must be at least 7 characters long.
You use this same ftplogin and ftppassword in the section,
202.
This completes the preparation for a firmware download.
Upload image file from the Web to staging
area
To upload files from the Web, you need a temporary staging area to store the firmware images before
downloading them to a TN circuit pack. Although the staging area is often on a PC platform, you can also
use other platforms such as a UNIX or Linux.
1
Go to the Avaya Support Web site (http://avaya.com/support). Follow the Software & Firmware
Downloads link and the subsequent links for your product and the target circuit pack TN code.
2
Find the section for the firmware vintage you want. Unless otherwise instructed, choose the
highest vintage.
3
Be sure to read that vintage's ReadMe file before downloading the image file(s).
4
For each image file to be downloaded:
a
Click on the image filename.
b
Save this file to disk in a local staging area directory.
c
Write down the path to the local staging area and the filename of the firmware image. You
need this information later.

FTP the image file to source

The following steps are generic to most FTP programs.
1
From the computer where the local staging area is, bring up a DOS interface or UNIX/Linux
shell.
2
Ensure that the new firmware image file is in the local staging area directory:
a
Change the directory to the staging area:
cd /your-staging-area
b
List the contents of the directory showing the most recent files last using dir /od (DOS) or
ls -ltr (UNIX/Linux).
202 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
FTP the image file to source
June 2004
on page