Avaya G450 Cli Reference Manual page 129

Table 85: SLS survivability CLI commands (continued)
Root Level First level command
Commands
station
trunk-group
Second level command
set
trunk-group-chan-sel
ect
show (sig-group)
set cor
set expansion-module
set name
set password
set port
set swhook-flash
set
trunk-destination
set type (station)
show (station)
Description
Specify the trunk-group number
that can accept incoming calls in
cases where the Information
Channel Selection field does not
specify a preferred channel for
bearer transport in SLS
List all SLS parameters for this
signaling-group
Administer stations for SLS
Administer the class-of-restriction
values for each station that uses
SLS
Administer a DCP or IP station for
an expansion module in SLS
Identify the user name for a
station in SLS
Administer a station password in
SLS for DCP and IP station sets
Administer the port on a station
for SLS
Enable SLS to recognize the
switchhook flash signal from a
particular analog station and to
provide a subsequent transfer
service
Administer a station extension to
be included in a pool of stations
that can receive incoming analog
loop-start trunk calls in circular
queuing in SLS
Administer specific phone models
for SLS
List all Station SLS parameters
for this station
Administer trunks for SLS
Issue 1 January 2008
8 of 11
129